Thursday 5 April 2018

PCB DESIGN INTERVIEW QUESTIONS

PCB design is a domain in which we should not have knowledge only for PCB design. We should have basic knowledge of PCB fabrication, PCB assembly, we should understand circuit flow in schematic.
Including above things, PCB design have 3 group:
Basic PCB design:
In this type of design, designer has to simply draw traces as per circuit flow.
High speed PCB design:
In this type of designs, designer has to follow all interfaces guideline.
HDI board:
HDI is the short form of “HIGH DENSITY INTERCONNECT”.
Now a days these type of PCB design are used in industries and demand only PCB designers who worked HDI boards.
In HDI board, Designers has to take care high speed interfaces guideline as well as DFM.
Here I have mentioned questions which will covers interview Questions which is related to technology, but there is no limit, because who is taking interview can ask questions as per there knowledge and work experience.
  1. What are major problems have you faced in your design?
  2. What is the meaning of Aspect ratio?
  3. Classes of IPC standard?
  4. Which standards we follow for PCB design?
  5. What is the use of decoupling capacitor?
  6. What is difference between decoupling and by pass capacitor?
  7. What is the use of stitching capacitor?
  8. Why we use Copper filling?
  9. Why we Place Crystal close to IC?
  10. What is relative permeability of FR4?
  11. What is the significant of FR4 and why we used this material?
  12. What is meaning of EMI/EMC? What precautions should take care for EMI/EMC?
  13. What is the meaning of fan-out?
  14. What is difference between analog and digital design?
  15. What is meaning of mixed signal board, what precaution will take care in mixed signal design?
  16. What is difference between local and global fiducial?
  17. What id difference between blind and buried vias?
  18. What is Ratsnest in PCB Layout terminology?
  19. Does analog effect digital signals or digital signals effect analog signals?
  20. What is star Grounding?
  21. What is the difference between impedance and resistance?
  22. How many type of impedance have you should in design & for which interfaces? What precautions should take care for 100 ohms impedance?
  23. What is difference between balanced and unbalanced stack up?
  24. How you will make sure that you have achieved target impedance without hyperlynx?
  25. What precautions should take care for high speed design?
  26. What is the meaning of DFM/DFT? Why we used?
  27. What is difference between solder mask and solder paste?
  28. Why we should avoid split plane?
  29. What is difference between thermal pad and antipad?
  30. If will increase trace width what effect will come on impedance?
  31. What types of high speed interfaces you have used in design?
  32. What will be trace width in below cases :
    1. If 1Amp Current-DC
    2. If 1Amp Current-AC
    3. If 1 Amp Current-AC/50Hz
  1. What is the meaning of signal integrity?
  2. How can say that a signal is high speed signal?
  3. What is the definition of characteristic impedance?
  4. Give any few tips to maintain integrity of a signal on a PCB?
  5. Why differential signaling is preferred for high speed signals
  6. What is IBIS model?
  7. What is termination resistor? Where and why they in PCB?
  8. What is cross talk in PCB?
  9. Why does ringing occur on the signals?
  10. Why length matching required in high speed board?
  11. What is micro strip & strip line?
  12. What is propagation delay
  13. What is skin effect?
  14. What is the meaning of GND bounce?
  15. What are current/ground loops in a PCB layout?
  16. What is back drilling and stacked vias?
  17. What are finished material used in fab industry?
  18. What is the meaning of tenting and feeling vias?
  19. Why does signal reflection occur in a PCB?
  20. What is active and passive Component?
  21. What is difference between crystal and Oscillator?
At the time of interview preparation, study all the interfaces guidelines which you have used in your design. If you never worked on any interfaces which is available in market. Search and study related to data to that interface also, because some time interviewer check that you never worked it’s ok but you have knowledge so they consider your candidature.
Soon I will share all high speed interfaces guideline which will helpful for you, so keep in touch
Best of luck for your interview

9 comments:

  1. I have read your post and got it quite informative. I couldn't find any knowledge on this matter prior to. I would like to thanks for sharing this article here. Electromechanical Franchise distributor

    ReplyDelete
  2. Thanks for sharing qualitive articles for interview, which are really helpful to us.more to know just click here Optoelectronics Franchise distributor

    ReplyDelete
  3. I really want to thank the author for such a nice blog that helped me to understand why it is important. Reverse Engineering PCB

    ReplyDelete
  4. Thanks mate. I am really impressed with your writing talents and also with the layout on your weblog. Appreciate, Is this a paid subject matter or did you customize it yourself? Either way keep up the nice quality writing, it is rare to peer a nice weblog like this one nowadays. Thank you, check also event marketing and conference gifts ideas

    ReplyDelete
  5. You have worked nicely with your insights that makes our work easy.online interview preparation service The information you have provided is really factual and significant for us. Keep sharing these types of article, Thank you.

    ReplyDelete
  6. I like your all post. You have done really good work. Thank you for the information you provide, it helped me a lot. I hope to have many more entries or so from you.
    Very interesting blog.
    wincracker.com
    Altium Designer crack
    AOMEI Partition Assistant crack
    FileMaker Pro crack
    Bandicam crack
    Edraw Max Pro crack

    ReplyDelete
  7. If you want to download the latest version of this software so links are given below
    We've added it to our list of bookmarked web pages and will be checking back in the near
    future. Please also visit my website and tell us what you think.

    AOMEI Partition Assistant Crack
    Artlantis Crack
    Freemake Video Converter Crack
    Advanced System Optimizer Crack

    ReplyDelete
  8. Still, the character of anti-gambling legal guidelines means the target is the operator, somewhat than the participant. Online video poker real money sport designers are beginning to add progressive jackpots to the games. It’s simple to create profitable patterns with the twos substituting for some other card. Plus, the game’s paytable is stacked for prime rewards. On Wednesday a man half in} video poker at Circa in downtown Las Vegas selected to carry one ace on the hand of 아벤카지노 Triple Double Bonus Poker.

    ReplyDelete